MQL trace lubricating oil is made of refined vegetable oil esters, extreme pressure antiwear agents, stabilizers, rust inhibitors, etc. through advanced production technology and scientific formula. This product is specially developed for the problems existing in the rapid processing of soft metal alloys such as aluminum and copper. It can be used with MQL micro lubrication device to significantly improve efficiency, save cutting tools, improve machining accuracy and save more than 95% of the amount of cutting oil in the rapid processing of soft metal.

So what are the advantages of micro lubricating oil in use:

1、 Use micro lubricating oil to effectively reduce costs

1. Small amount of special cutting oil is used to effectively reduce the purchase and inventory costs

2. Eliminating the routine management of traditional cutting fluid and waste liquid treatment

3. Simplified cutting fluid supply device without circulating filtration system

4. Improve production efficiency and effectively reduce production costs

5. Clean and dry chips can be directly returned to the furnace for smelting without cleaning, eliminating many post-treatment processes

6. There is almost no oil on the workpiece, and even the subsequent cleaning process can be exempted

2、 Improve production efficiency / surface quality by using micro lubricating oil Benshen micro lubricating tool life

1. Increase cutting speed and feed

2. Reduce friction between tool workpiece and tool chip

3. Improve machining accuracy and reduce surface roughness

4. Basically maintain room temperature except for tool and workpiece size changes

5. It can prolong the tool life by 1-2 times

3、 The use of trace lubricating oil is environmentally safe and clean

1. Spray the lubricating fluid to the edge of the cutting opening without oil mist diffusion

2. It can be used in air-conditioned room, and the site is clean and tidy

3. There is basically no residue on the cutting surface and chips

4. Vegetable oil based products, friendly to human body

5. Non combustible TSCA (control of toxic substances) is classified as non-toxic

6. Biodegradable and environmentally friendly (in line with IS0 14000 environmental standards)

7. No damage to water, air and soil

8. Used for magnesium alloy processing, which can effectively reduce the explosion risk

9. No oil leakage, ground pollution, odor, etc. around the machine tool, which is conducive to 7S site management